Products
Standard packaging units are hobbocks, drums and IBCs.
mk-Hydrocolor HWP – high quality water borne pigment prepartions
Formulated based on resin and wetting agents.
Properties
- VOC-low
- Optimum pigment loading
- Narrow color deviation tolerances
- High color strength and gloss
- Good rheological properties
- Long stability
Application areas
- Flexographic inks as a main
- Gravure inks
- Water dissolvable colors
- Stainings
- Water borne lacquers
- Artist colors
mk-Hydrocolor LWP – High performance, water water borne pigment preparations
Formulated based on non-ionic high molecular dispersing agents.
Properties
- VOC – free or very low (< 1%)
- No resin content
- Glycole free
- Very high color strength and gloss
- High light and weathering fastness
- Outstanding rheological properties
- Good and wide compatibility in various systems
- Provides and optimum flowing and drying behavior of coatings
- Selection of inorganic and organic pigments
- Optimum pigment loading
Application areas
- Coloring high quality decorative coatings
- Industrial and construction lacquers
- Water borne stainings
- Good compatibility in various water borne systems
including 2K-PU and EP - Textile coatings
- Leather coatings
mk-Solcolor LP – solvent borne pigment preparations
Formulated in long chain alkyd resins with additives.
Properties
- Free of aromates
- Broad selection of inorganic and organic pigments
- Good light and waethering fastness
- Stable
- Good rheological properties
- Good compatibility
Application areas
- Construction lacquers
- Stainings
- Wood and furniture paints
- Resin colors
mk-Solcolor ULP – broad compatible, universal solvent borne pigment preparations based on alkyd resins
Properties
- Free of aromates
- Alkyd resin based
- High color strenght and gloss
- Narrow color deviation tolerances
- Consistent results
- Good rheological properties
- Outstanding stability
- Very good compatibility in solvent borne systems
(Alkyd, Acryl, NC, PU, EP, Polyester etc.) - Very good light and weathering fastness
- Temperature and chemical stability
- Broad selection of inorganic and organic pigments
Application areas
- Industrial lacquers
- Construction lacquers
mk-Transoxid Red and Yellow WD – water borne preparations of transparent iron oxides
Properties
- Low VOC content
- High pigment loading
- Low viscosity
- High color strength
- Good transparency
- Outstanding UV absorber
- Very good light and weathering fastness
Application areas
- As UV-absorber
- Coloring agent for stainings, mordants and lacquers
- Shading of colors
- Wood paints and stainings
- Paints and coatings
mk-Transoxid Red und Yellow LD – solvent borne preparations of transparent iron oxides
Properties
- Free of aromates
- Based on long chain alkyd resin solutions
- Optimum pigment and solid content
- Good transparency
- Good stability
- Outstanding UV absorber
- Very good light and weathering fastness
Application areas
- In solvent borne stainings and mordants
- Coloring furniture paints and resin paints
- UV-absorber
- Wood paints and stainings
- Paints and coatings
mk-Tiosorb WD – Water borne prepartion of highly transparent TiO2
Ultra fine TiO2 consists of primary partcles smaller than 100 nm. Comparing
to the bigger particles of the TiO2-pigment, the nano particles of the
transparent TiO2 enhance the UV-refraction and UV-absorbing properties.
Properties
- VOC-low (< 1%)
- Rutile crystal form
- Gylcole free
- Upon current knowledge, no hazard labelling
- High pigment loading
- Highly transparent
- Very good rheological properties (suitable for manual and automatic dosing)
- High light and weathering fastness
- Compatible with a lot of systems
- No negative influence on flowing and drying behavior in coatings
Application areas
UV-protection agents with neutral color shades in all kind of water borne coating
systems. The dosage depends on the system and the intensity of the
sun light and should basically be between 0,25 and 1,5%.
mk-Tiosorb LD - Solvent borne prepartion of highly transparent TiO2
Ultra fine TiO2 consists of primary partcles smaller than 100 nm. Comparing
to the bigger particles of the TiO2-pigment, the nano particles of the
transparent TiO2 enhance the UV-refraction and UV-absorbing properties.
Properties
- High pigment loading
- Rutile crystal form
- Highly transparent
- Alkyd resin based
- Very good rheological properties (suitable for manual and
automatic dosing) - High light and weathering fastness
- Compatible with a lot of systems
- No negative influence on flowing and drying behavior in coatings
Application areas
UV-protection paints with neutral shades for solvent
borne coating systems (Acryl-, PU-, UV-Lacke, Epoxi-, Polyester etc.). The
dosage depends on the system and the intensity of the sun light and
should basically be between 0,25 and 1,5%.
mk-Epoxycolor - Pigment preparations with an epoxy resin as vehicle
Properties
- Modified epoxy resin
- High light and weathering fastness
- Good temperature and chemical resistance
- High pigment loading
- Good chemical resistance
- Good stability
- Consistent results
- Optimization on applications
- Broad selection of inorganic and organic pigments
Application areas
- Floor-, Wall coatings (i.e. for halls and parking houses)
- Coloring of resin matrixes
- Decorative furniture coatings
- Epoxide based glues
Upon different application areas and the related requirements, different epoxy resins are used. Those pastes are mixable,
while through mixing all RAL colors could be obtained.
Additionally, we offer read to use Epoxy repair sealants
for repairing work on steel, plastic, concrete, wood, etc.
mk-Desmocolor - Solvent borne pigment preparations to color PU-coatings
Properties
- Polyol as vehicle
- Pigment or pigment combinations with high fastnesses
- High concentrated
- Good compatibility
- Suitable for high resistance coatings
- Broad selection of inorganic and organic pigments
Application areas
- Stable outstanding coatings for textiles, wood, floors, etc.
- 2K-PUR paints
- Coloring of grave
mk-Platicizer pastes – Pigment preparations to color PVC-Plastisols
Properties
- Phthalate based or phthalate free
- Pigments with high light and weathering fastness as well as migration stable
- High temperature resistance
- Optimum pigment dispersibility
- Narrow tolerances
- Good compatible with plastisols
- Broad selection of inorganic and organic pigments
Application areas
- Coloring of soft PVC systems for wide application areas
- Toys
- Soft PVC
- Technical textiles
- Foils
mk-Fluo - water borne preparations of daylight fluorescent pigments
Properties
- High color strength
- High concentrated (approx. 45 %)
- Formulated with non ionic dispersing agents
- Good stability and rheological properties
- VOC-low (< 1%)
- Very good compatibility with a lot of typical resin systems
- Available now the colors Yellow, Orange, Red, Pink, Violet, Blue and Green
Application areas
- Warning panels
- Security clothing
- Marking and decoration paints
Upon request, the preparations as also available for solvent borne systems